5 Minutes into bringing the bike home, I started tinkering.
Heres a guide on how to install bar end mirrors
Tools:
Assorted Allen Wrenches
Saw/PVC hose cutter
15mm ID PVC Hose
Loctite
Remove the balancer (it is in itself a giant bolt)
You will need a 15mm ID PVC pipe.. Just very little so, but the bare minimum or ask the hardware store if they can give u scraps
Mine is used but who cares.. I had some lying around
Measure the thickness of the pipe as thick as the clamping part of the mirror
It can be a hair thicker but not too thick
Cut it!!
Here's what it looks like.. It will be a little loose.. But don't worry..
Thread lock everything.. Don't wait to retighten
Hand tighten first.. And locktite the balancer too
Slot on the mirror clamp but don't tighten.. Then slide the pvc sleeve on the end
Screw it in... For the throttle, tighten but adjust the balancer until the throttle isn't sticky
Done product
No comments:
Post a Comment